View our products
Contact us
Enquire into our products or send us any queries you may have
Sales form & details on purchasing
View some other sites which may be of interest to you

1U rackmount high quality 2 channel amplifier.
Channel 1 Mic amp with D.I.:
The features of the microphone amplifier consist of low noise and low distortion. It offers switched gain controls for high accuracy level setting (4 dB steps), D.I. Input (high impedance), level indication, high pass filter (switchable), 26dB pads (switchable), phase reversal and 48v phantom supply (switchable).
Mic amp can be linked to Limiter / Compressor [ Switchable ]
Channel 2 Limiter / Compressor:
  • Low noise and distortion [Decca 1977 circuit brought up to date]
  • Recovery time switched, 1secs and 0.3secs
  • Threshold calibrated in dBu ref. output level
  • LED metering
  • Limiter/compress On/off switch
  • Overall low noise and distortion.
  • Input gain control to +20dB
Mic Amp with D.I.:
Frequency response: 10Hz - 150KHz ± 0.25dB   Mic gain range: 22dB - 66dB in 4dB steps.
[pad in -4dB - 40dB]
Distortion: Less than 0.01%
Typ, 0.001% 1KHz @ +20dBu o/p
High pass filter:

68Hz @ 12dB per octave (Switchable bothchannels)

Noise: 25 microvolts [-110dB ref
+20 dBu. Bandwidth 10Hz-18KHz input loaded 150 ohms, 32dB gain].
Phase reversal:


48v phantom: On channel 1 Level indication:

Red LED +18dB
Green LED +8dB
Green LED 0dB

26dB pads: On channel 1 Clipping level: +29 dBu
D.I. input:

Channel 1 High impedance
[1.8 Meg Ohms]

Connectors: IEC mains
Input - XLR x 2, Jack x 1 (DI Input)
Output - XLR x 2 (bal), Jack x 2 (unbal)
D.I. gain range: Channel 1 only -8 > 36dB in 4dB steps   Dimensions: 19" 1U rack mount. Depth = 150mm
    Price: P.O.A.
If You wish to purchase this product please click on Contacts or Sales below.
If you wish to ask a question about this product please click on Contacts or Enquiries below.